> For the complete documentation index, see [llms.txt](https://docs.copia.io/docs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.copia.io/docs/devicelink/basic/keyence/keyence-sr-750.md).

# Keyence SR-750

## Overview

Keyence SR-750 barcode readers can be backed up with Copia DeviceLink using the [FTP](https://docs.copia.io/docs/devicelink/basic/copia-ftp.md) integration. The SR-750 operates as an FTP server, and a Copia FTP project retrieves the reader's setting file (`.ptc`) on a scheduled Job.

## Requirements

Below are the requirements to configure a Copia Agent for the backup of Keyence SR-750:

* Network access from the Copia Agent to the reader on TCP port 21 (FTP service) and port 20 (FTP data, active mode).
* The Agent should be tested to confirm that it can backup the desired files via an FTP Client.

{% hint style="info" %}
AutoID Network Navigator should be used to confirm the reader's IP address and FTP settings.
{% endhint %}

## Keyence SR-750 Configuration

#### Confirm the FTP server is enabled

The SR-750 can operate as an FTP server, or as both an FTP server and an FTP client. This is selected by the **IP address** in the reader's **FTP transmission** settings:

* `0.0.0.0` — FTP server only
* Any other address — FTP server and FTP client

Either setting allows Copia to connect to the reader's FTP server. The SR-750 FTP server is an **anonymous** FTP server.

#### Verify FTP access

From the Copia Agent, connect to the reader's IP address with an FTP client (port 21) and confirm that the setting file (`.ptc`) is listed.

{% hint style="warning" %}

* The reader allows a maximum of **two simultaneous FTP connections**, and disconnects an FTP client that is idle for 60 seconds.
* A reading operation cannot start during an image transmission, so schedule Jobs at a time when this is acceptable.
* The reader's clock is not kept, so file timestamps show Jan 01 2000 unless the reader is connected to an SNTP server.
  {% endhint %}

## Project Configuration

{% hint style="info" %}
FTP projects require a [File List](https://docs.copia.io/docs/devicelink/sitesandagents/sites/file-lists.md) to determine what files on the device to include/exclude, or exclude from compare. Copia does not provide a default FTP file list, as every device is unique. **It is recommended** to add a file list for the device type prior to creating a project, as it will be required prior to backup operations.
{% endhint %}

To configure a Keyence SR-750 project, you need a repository with a folder to store the device data. The folder is usually named similar to the target device.

#### Define the Project

Click either of the *Add a Project* buttons in the Projects tab.

<figure><img src="https://3704730939-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F4lSQNVI3DZ15V7kjkMCA%2Fuploads%2FPN4AXNIBkO2Q7I4C3J3X%2Fimage.png?alt=media&amp;token=bceca55f-bee0-4440-ba90-9f7776b25e8c" alt=""><figcaption></figcaption></figure>

The *Add a new project* configuration dialog will appear which allows you to fully configure the project, devices and job for the project.

<figure><img src="https://3704730939-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F4lSQNVI3DZ15V7kjkMCA%2Fuploads%2FcwaXoFHfSdW3yPKP7gF1%2Fnew_project_flow_a.png?alt=media&amp;token=600d35fd-b785-4180-826b-1d53f4d0b972" alt=""><figcaption></figcaption></figure>

To get started, select **FTP** as the *Project Type*, and then select an *Agent*. If you have not already created an Agent, you can create and assign an Agent at a later time. See more about this in the [Agents](https://docs.copia.io/docs/devicelink/sitesandagents/agents.md) section of the documentation.

When complete, press *Save and Continue*.

<figure><img src="https://3704730939-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F4lSQNVI3DZ15V7kjkMCA%2Fuploads%2F6bvnqiEVlJlnS58USNci%2Fimage.png?alt=media&amp;token=f0e0556c-b65f-4dfb-9ba8-d6e4ab7b284b" alt=""><figcaption></figcaption></figure>

You will now select the Project Path, which is the location (Repo/Branch) that the project is, or will be stored.&#x20;

<figure><img src="https://3704730939-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F4lSQNVI3DZ15V7kjkMCA%2Fuploads%2Fs81HVo4jUkkYjtJZONNH%2Fimage.png?alt=media&amp;token=0062e102-26eb-4cc4-958c-b182ef7beb2e" alt=""><figcaption></figcaption></figure>

You can either select an existing folder, or create a new empty folder. Once complete, press *Save and Continue* to proceed.

<figure><img src="https://3704730939-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F4lSQNVI3DZ15V7kjkMCA%2Fuploads%2FrCQ0ZzUxukYOqvEC9Ub3%2Fimage.png?alt=media&amp;token=7f6e4efb-fc2e-4a65-9a6a-f7a25ecc8736" alt=""><figcaption></figcaption></figure>

The project details allows you to update the Project name, and description if desired, and select the [**File List**](https://docs.copia.io/docs/devicelink/sitesandagents/sites/file-lists.md).

Select a pre-existing file list, or press the *Create a file list* link to create one with:

* **Name:** `Keyence_SR750`
* **Project Type:** FTP
* **Include in Backup:** `*.ptc` (add `*.lua` if the reader uses script files)

Press *Save and Continue* to proceed.

<figure><img src="https://3704730939-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F4lSQNVI3DZ15V7kjkMCA%2Fuploads%2FAOjcOJhHZqSB0JfD3HHa%2Fimage.png?alt=media&amp;token=6012b784-450a-4e05-9a55-ce92e914a45a" alt=""><figcaption></figcaption></figure>

#### Define the Device

The Device Setup section is for defining the device information (IP address, authentication, etc.) that is in your project. If you have pre-created devices, you can add existing devices, otherwise you can *Add a Device* as seen.

* **Host / IP Address:** {reader IP address}
* **Username:** `anonymous`
* **Password:** {leave blank}
* **Start Directory:** leave blank

Press *Save Device* when complete.

<figure><img src="https://3704730939-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F4lSQNVI3DZ15V7kjkMCA%2Fuploads%2FBbtuZRqhWorUwYRaYH1l%2Fimage.png?alt=media&amp;token=72faf5b2-0882-4ffc-8a69-46e76260c10f" alt=""><figcaption></figcaption></figure>

#### Define the Job

Creating Jobs is similar for all vendor types, and is described in the [Creating Jobs](https://docs.copia.io/docs/devicelink/jobs/creating-jobs.md) section. It is recommended to review that section while completing a job configuration, and press Save to save the job. You can create more than one job for a device if desired.

<figure><img src="https://3704730939-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F4lSQNVI3DZ15V7kjkMCA%2Fuploads%2FnFauL2gTIi7bUeHnrbbV%2Fimage.png?alt=media&amp;token=123159fa-f5f1-4338-8273-b8c5595830cc" alt=""><figcaption></figcaption></figure>

#### Submit the Configuration

Once complete, press *Submit Project Setup* to create the Project, Device and Job.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://docs.copia.io/docs/devicelink/basic/keyence/keyence-sr-750.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
